Home / Controllers / Digital PID Controllers

2020 Latest Kiln controllers Just Released Model 2E and model 2E-4

Now With WIFI ON/OFF Control and IP Camera Compatible you can set Timing Schedules ,Group Management , Smart Scenes and share control to others. Works with Google Home and Alexa

Digital PID Controller with % heat output

Support multiple sensor type input (K,S,R,T,E,J,B,N,CU50,PT100)

These can be used for many applications for heating and cooling such as:

• Pottery Kilns ,Glass Kilns, Enameling Kilns,China Painting Kilns,Jewelry Kilns / Furnaces,Metal Forge Kilns / Furnaces,Annealing Kilns / Furnaces,Knife Kilns / Furnaces,Home Brew,Distillery, Salt Bath,
• and also Precious Metal Clay / PMC and much more!.

Controller is PID set point and hold only.

Controller comes 10Amp only.

There is a choice of 2 Colours Green or Yellow state at time of purchase.

Input Voltage AC:110V-240V AC (110volt can be supplied as special order POA)

Plug through models can be just plugged into the wall outlet and the appliance you wish to control plugs into the 3 pin socket on the unit then place thermocouple into the chamber being controlled.
Controller has 2 Modes, a Heat Mode and a Cooling Mode.

Controller can read from -1999deg C to 1820deg C. (Depending on Thermocouple type).

Controller comes with a low temp -200 to 400 C type K thermocouple and also with Type K High Temp Thermcouple 8 Gauge 200mm / 8 inch -200 to 1300 C

If you require a different thermocouple type Please see thermocouples page. Phone 02 4956 5211 Or Email aakilns@gmail.com
Item sold with Australian 3 pin Plug only.( Universal Power Adaptors Not Supplied).
Includes a controller Manual , easy to use.

Kiln controller Wifi Module, Turn your Kiln on or off from anywhere in the world using google Home or Alexa.

Digital PID Controller with ramp / soak & shut off

model 2E-4

This can be used for many applications various heating and cooling applications Such as Kilns / Knife Furnace or Distillery can also be used for semi automatic firing of glass kilns and much more.

Support multiple sensor type input (J,K,T,E,B,R,S,N & PT100) Thermocouple not included with this model please see http://aakilns.com/thermocouples.php page for options

Controller is a BTC-9100 PID with single ramp to target temperature with hold time & shut off.

All settings above can be changed during firing.

Ramp rate can be set to achieve a slower or faster heating rate during firing.

Comes in 10Amp or 4 Pin Version. State at time of purchase.

There is a choice of 2 Colours Green or Yellow state at time of purchase.

Suitable for 240volt 10Amp Single Phase
Input Voltage AC:110V-240V AC (110volt can be supplied as special order POA)

Plug through models can be just plugged into the wall outlet and the appliance you wish to control plugs into the 3 pin socket on the unit and place thermocouple into the chamber being controlled.
4 pin models can work with multiphase kilns of any amp / power rating however they require a 4 pin harco compatible socket fitted to the kiln.
Controller has 2 Modes, a Heat Mode and a Cooling Mode.

Using up/down buttons and a scroll button
You set the Set Point / target temperature in deg C.
Then the Time for hold at the set point / target temperature in minutes.
Next the Ramp for raising the chamber temperature in deg.C/minute.

The kiln heat switch is left on "Full" or "HI" position so elements are controlled by the ramp / soak controller.

When you start the controller with kiln loaded and door closed the kiln fires as set by the controller with auto firing with a single ramp including a single timed soak period then shut off.

It comes supplied with both an easy easy to follow manual and a technical manual for more advanced settings.

Controller can read from -1999deg C to 1800deg C.

Item sold with Australian 3 pin Plug only Universal Power Adaptors Not Supplied or 4 Pin Version sold with Harco compatable Plug.
Comes with easy to follow Manual as well as Technical manual

Thermocouple Sold Separately

Kiln controller Wifi Module Turn your Kiln on or off from anywhere in the world using google Home or Alexa. optional extra Coming Soon on 2-E4

Brainchild BTC-9100 Maunal

Home / Controllers / Digital PID Controllers